This is a list of ASTM International standards.Standard designations usually consist of a letter prefix and a sequentially assigned number. This may optionally be followed by a dash and the last two digits of the year in which the standard was adopted. Prefix letters correspond to the following subjects:
Standard by ASTM International. Add to Cart; Printed Edition + PDF Immediate download $57.00; Add to Cart; Customers Who Bought This Also Bought. ASTM A656/A656M-18 Priced From $42.00 ASTM A678/A678M-05(2009) Priced From $50.00 ASTM A516/A516M-17 Priced From $42.00.
- A = Iron and Steel Materials
- B = Nonferrous Metal Materials
- C = Ceramic, Concrete, and Masonry Materials
- D = Miscellaneous Materials
- E = Miscellaneous Subjects
- F = Materials for Specific Applications
- G = Corrosion, Deterioration, and Degradation of Materials
This list may include either current or withdrawn standards. A withdrawn standard has been discontinued by its sponsoring committee. A standard may be withdrawn with or without replacement.
A[edit]
Standard | Title | Notes |
---|---|---|
ASTM AIIMASTM | Portable Document Format-Healthcare (PDF) A Best Practices Guide | |
ASTM A1 | Standard Specification for Carbon SteelTee Rails | |
ASTM A2 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types | |
ASTM A3 | Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) | |
ASTM A6/A6M | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling | |
ASTM A20/A20M | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | |
ASTM A27/A27M | Standard Specification for Steel Castings, Carbon, for General Application | |
ASTM A29/A29M | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought | |
ASTM A31 | Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels | |
ASTM A34/A34M | Standard Practice for Sampling and Procurement Testing of Magnetic Materials | |
ASTM A36/A36M | Standard Specification for Carbon Structural Steel | |
ASTM A47/A47M | Standard Specification for Ferritic Malleable Iron Castings | |
ASTM A48/A48M | Standard Specification for Gray Iron Castings | |
ASTM A49 | Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars | |
ASTM A53/A53M | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless | |
ASTM A65 | Standard Specification for Steel Track Spikes | |
ASTM A66 | Standard Specification for Steel Screw Spikes | |
ASTM A67 | Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked | |
ASTM A74 | Standard Specification for Cast Iron Soil Pipe and Fittings | |
ASTM A90/A90M | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings | |
ASTM A99 | Standard Specification for Ferromanganese | |
ASTM A100 | Standard Specification for Ferrosilicon | |
ASTM A101 | Standard Specification for Ferrochromium | |
ASTM A102 | Standard Specification for Ferrovanadium | |
ASTM A105/A105M | Standard Specification for Carbon Steel Forgings for Piping Applications | |
ASTM A106/A106M | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | |
ASTM A108 | Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished | |
ASTM A109/A109M | Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled | |
ASTM A111 | Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire | |
ASTM A116 | Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric | |
ASTM A121 | Standard Specification for Metallic-Coated Carbon Steel Barbed Wire | |
ASTM A123/A123M | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products | |
ASTM A125 | Standard Specification for Steel Springs, Helical, Heat-Treated | |
ASTM A126 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings | |
ASTM A128/A128M | Standard Specification for Steel Castings, Austenitic Manganese | |
ASTM A131/A131M | Standard Specification for Structural Steel for Ships | |
ASTM A132 | Standard Specification for Ferromolybdenum | |
ASTM A134 | Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) | |
ASTM A135/A135M | Standard Specification for Electric-Resistance-Welded Steel Pipe | |
ASTM A139/A139M | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) | |
ASTM A143/A143M | Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement | |
ASTM A144 | Standard Specification for Ferrotungsten | |
ASTM A146 | Standard Specification for Molybdenum Oxide Products | |
ASTM A148/A148M | Standard Specification for Steel Castings, High Strength, for Structural Purposes | |
ASTM A153/A153M | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware | |
ASTM A159 | Standard Specification for Automotive Gray Iron Castings | |
ASTM A167 | Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip | (Withdrawn 2014, no replacement) |
ASTM A178/A178M | Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes | |
ASTM A179/A179M | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes | |
ASTM A181/A181M | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping | |
ASTM A182/A182M | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service | |
ASTM A183 | Standard Specification for Carbon Steel Track Bolts and Nuts | |
ASTM A184/A184M | Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement | |
ASTM A192/A192M | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service | |
ASTM A193/A193M | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications | Grade B7 Studs bolts and Grade B16 Studs bolts fall in this category and are used for high temperature, high-pressure environments like petroleum industry. |
ASTM A194/A194M | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | |
ASTM A197/A197M | Standard Specification for Cupola Malleable Iron | |
ASTM A203/A203M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel | |
ASTM A204/A204M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum | |
ASTM A209/A209M | Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes | |
ASTM A210/A210M | Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes | |
ASTM A213/A213M | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | |
ASTM A214/A214M | Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes | |
ASTM A216/A216M | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | |
ASTM A217/A217M | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service | |
ASTM A220/A220M | Standard Specification for Pearlitic Malleable Iron | |
ASTM A225/A225M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel | |
ASTM A227/A227M | Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs | |
ASTM A228/A228M | Standard Specification for Steel Wire, Music Spring Quality | |
ASTM A230/A230M | Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality | |
ASTM A231/A231M | Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire | |
ASTM A232/A232M | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire | |
ASTM A234/A234 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service | |
ASTM A239 | Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles, | |
ASTM A240/A240M | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | |
ASTM A242/A242M | Standard Specification for High-Strength Low-Alloy Structural Steel | |
ASTM A247 | Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings | |
ASTM A249/A249M | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes | |
ASTM A250/A250M | Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes | |
ASTM A252 | Standard Specification for Welded and Seamless Steel Pipe Piles | |
ASTM A254/A254M | Standard Specification for Copper-Brazed Steel Tubing | |
ASTM A255 | Standard Test Methods for Determining Hardenability of Steel | Includes the Jominy test and a method based on work by M. A. Grossman (the Grossman method).[1] |
ASTM A262 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | |
ASTM A263 | Standard Specification for Stainless Chromium Steel-Clad Plate | |
ASTM A264 | Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate | |
ASTM A265 | Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate | |
ASTM A266/A266M | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | |
ASTM A268/A268M | Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service | |
ASTM A269/A269M | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service | |
ASTM A270/A270M | Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing | |
ASTM A275/A275M | Standard Practice for Magnetic Particle Examination of Steel Forgings | |
ASTM A276/A276M | Standard Specification for Stainless Steel Bars and Shapes | |
ASTM A278/A278M | Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C) | |
ASTM A283/A283M | Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates | |
ASTM A285/A285M | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength | |
ASTM A288 | Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators | |
ASTM A289/A289M | Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators | |
ASTM A290/A290M | Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears | |
ASTM A291/A291M | Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears | |
ASTM A295/A295M | Standard Specification for High-Carbon Anti-Friction Bearing Steel | |
ASTM A297/A297M | Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application | |
ASTM A299/A299M | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon | |
ASTM A302/A302M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel | |
ASTM A304 | Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements | |
ASTM A307 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength | |
ASTM A311/A311M | Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements | |
ASTM A312/A312M | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | |
ASTM A313/A313M | Standard Specification for Stainless Steel Spring Wire | |
ASTM A314 | Standard Specification for Stainless Steel Billets and Bars for Forging | |
ASTM A319 | Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts | |
ASTM A320/A320M | Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service | |
ASTM A322 | Standard Specification for Steel Bars, Alloy, Standard Grades | |
ASTM A323 | Standard Specification for Ferroboron | |
ASTM A324 | Standard Specification for Ferrotitanium | |
ASTM A325/A325M | Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength | (Withdrawn 2016, replaced by F3125/F3125M) |
ASTM A327/A327M | Standard Test Methods for Impact Testing of Cast Irons | |
ASTM A328/A328M | Standard Specification for Steel Sheet Piling | |
ASTM A333/A333M | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness | |
ASTM A334/A334M | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service | |
ASTM A335/A335M | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service | |
ASTM A336/A336M | Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts | |
ASTM A338 | Standard Specification for Malleable Iron Flanges, Jeff, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) | |
ASTM A340 | Standard Terminology of Symbols and Definitions Relating to Magnetic Testing | |
ASTM A341/A341M | Standard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods | |
ASTM A342/A342M | Standard Test Methods for Permeability of Weakly Magnetic Materials | |
ASTM A343/A343M | Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame | |
ASTM A345 | Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications | |
ASTM A348/A348M | Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame | |
ASTM A350/A350M | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | |
ASTM A351/A351M | Standard Specification for Castings, Austenitic, for Pressure-Containing Parts | |
ASTM A352/A352M | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service | |
ASTM A353/A353M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9% Nickel | |
ASTM A354 | Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners | |
ASTM A355 | Standard Specification for Steel Bars, Alloys, for Nitriding | |
ASTM A356/A356M | Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines | |
ASTM A358/A358M | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications | |
ASTM A363 | Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand | |
ASTM A367 | Standard Test Methods of Chill Testing of Cast Iron | |
ASTM A368 | Standard Specification for Stainless Steel Wire Strand | |
ASTM A369/A369M | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service | |
ASTM A370 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products | |
ASTM A372/A372M | Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels | |
ASTM A376/A376M | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service | |
ASTM A377 | Standard Index of Specifications for Ductile-Iron Pressure Pipe | |
ASTM A380/A380M | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems | |
ASTM A381 | Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems | |
ASTM A384/A384M | Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies | |
ASTM A385/A385M | Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) | |
ASTM A387/A387M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum | |
ASTM A388/A388M | Standard Practice for Ultrasonic Examination of Steel Forgings | |
ASTM A389/A389M | Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service | |
ASTM A390 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) | |
ASTM A391/A391M | Standard Specification for Grade 80 Alloy Steel Chain | |
ASTM A392 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric | |
ASTM A394 | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare | |
ASTM A395/A395M | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | |
ASTM A400 | Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties | |
ASTM A401/A401M | Standard Specification for Steel Wire, Chromium-Silicon Alloy | |
ASTM A403/A403M | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | |
ASTM A407 | Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs | |
ASTM A409/A409M | Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service | |
ASTM A411 | Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire | |
ASTM A413/A413M | Standard Specification for Carbon Steel Chain | |
ASTM A414/A414M | Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels | |
ASTM A416/A416M | Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete | |
ASTM A418/A418M | Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings | |
ASTM A420/A420M | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service | |
ASTM A421/A421M | Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete | |
ASTM A423/A423M | Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes | |
ASTM A424/A424M | Standard Specification for Steel, Sheet, for Porcelain Enameling | |
ASTM A426/A426M | Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service | |
ASTM A427/A427M | Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction | |
ASTM A428/A428M | Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles | |
ASTM A434/A434M | Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered | |
ASTM A435/A435M | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates | |
ASTM A436 | Standard Specification for Austenitic Gray Iron Castings | |
ASTM A437/A437M | Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service | |
ASTM A439/A439M | Standard Specification for Austenitic Ductile Iron Castings | |
ASTM A447/A447M | Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service | |
ASTM A449 | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use | |
ASTM A450/A450M | Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes | |
ASTM A451/A451M | Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service | |
ASTM A453/A453M | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels | |
ASTM A455/A455M | Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese | |
ASTM A456/A456M | Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings | |
ASTM A459 | Standard Specification for Zinc-Coated Flat Steel Armoring Tape | |
ASTM A460 | Standard Specification for Copper-Clad Steel Wire Strand | |
ASTM A463/A463M | Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process | |
ASTM A466/A466M | Standard Specification for Weldless Chain | |
ASTM A467/A467M | Standard Specification for Machine and Coil Chain | |
ASTM A469/A469M | Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors | |
ASTM A470/A470M | Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts | |
ASTM A471/A471M | Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels | |
ASTM A472/A472M | Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings | |
ASTM A473 | Standard Specification for Stainless Steel Forgings | |
ASTM A474 | Standard Specification for Aluminum-Coated Steel Wire Strand | |
ASTM A475 | Standard Specification for Zinc-Coated Steel Wire Strand | |
ASTM A476/A476M | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls | |
ASTM A478 | Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire | |
ASTM A479/A479M | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | |
ASTM A480/A480M | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | |
ASTM A481 | Standard Specification for Chromium Metal | |
ASTM A482/A482M | Standard Specification for Ferrochrome-Silicon | |
ASTM A483/A483M | Standard Specification for Silicomanganese | |
ASTM A484/A484M | Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings | |
ASTM A485 | Standard Specification for High Hardenability Antifriction Bearing Steel | |
ASTM A487/A487M | Standard Specification for Steel Castings Suitable for Pressure Service | |
ASTM A488/A488M | Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel | |
ASTM A489 | Standard Specification for Carbon Steel Lifting Eyes | |
ASTM A490/A490M | Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength | (Withdrawn 2016, replaced by F3125/F3125M) |
ASTM A491 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric | |
ASTM A492 | Standard Specification for Stainless Steel Rope Wire | |
ASTM A493 | Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging | |
ASTM A494/A494M | Standard Specification for Castings, Nickel and Nickel Alloy | |
ASTM A495 | Standard Specification for Calcium-Silicon Alloys | |
ASTM A498/A498M | Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins | |
ASTM A499 | Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails | |
ASTM A500/A500M | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes | |
ASTM A501/A501M | Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing | |
ASTM A502 | Standard Specification for Rivets, Steel, Structural | |
ASTM A503/A503M | Standard Specification for Ultrasonic Examination of Forged Crankshafts | |
ASTM A504/A504M | Standard Specification for Wrought Carbon Steel Wheels | |
ASTM A505 | Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for | |
ASTM A506 | Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled | |
ASTM A507 | Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled | |
ASTM A508/A508M | Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels | |
ASTM A510/A510M | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel | |
ASTM A511/A511M | Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar | |
ASTM A512 | Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing | |
ASTM A513/A513 | Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing | |
ASTM A514/A514 | Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding | |
ASTM A515/A515M | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service | |
ASTM A516/A516M | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service | |
ASTM A517/A517M | Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered | |
ASTM A518/A518M | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings | |
ASTM A519/A519 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing | |
ASTM A521/A521M | Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use | |
ASTM A522/A522M | Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service | |
ASTM A523 | Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits | |
ASTM A524 | Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures | |
ASTM A529/A529M | Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality | |
ASTM A530/A530M | Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe | |
ASTM A531/A531M | Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings | |
ASTM A532/A532M | Standard Specification for Abrasion-Resistant Cast Irons | |
ASTM A533/A533M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel | |
ASTM A534 | Standard Specification for Carburizing Steels for Anti-Friction Bearings | |
ASTM A536 | Standard Specification for Ductile Iron Castings | |
ASTM A537/A537M | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel | |
ASTM A540/A540M | Standard Specification for Alloy-Steel Bolting for Special Applications | |
ASTM A541/A541M | Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components | |
ASTM A542/A542M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium | |
ASTM A543/A543M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum | |
ASTM A550 | Standard Specification for Ferrocolumbium (Ferroniobium) | |
ASTM A551/A551M | Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications | |
ASTM A553/A553M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel | |
ASTM A554 | Standard Specification for Welded Stainless Steel Mechanical Tubing | |
ASTM A555/A555M | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods | |
ASTM A556/A556M | Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes | |
ASTM A560/A560M | Standard Specification for Castings, Chromium-Nickel Alloy | |
ASTM A561 | Standard Practice for Macroetch Testing of Tool Steel Bars | |
ASTM A562/A562M | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings | |
ASTM A563M | Standard Specification for Carbon and Alloy Steel Nuts (Metric) | |
ASTM A563 | Standard Specification for Carbon and Alloy Steel Nuts | |
ASTM A564/A564M | Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes | |
ASTM A565/A565M | Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service | |
ASTM A568/A568M | Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for | |
ASTM A570 | Standard Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled | (Withdrawn 2000, replaced by A1011/A1011M) |
ASTM A571/A571M | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service | |
ASTM A572/A572M | Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel | |
ASTM A573/A573M | Standard Specification for Structural Carbon Steel Plates of Improved Toughness | |
ASTM A574 | Standard Specification for Alloy Steel Socket-Head Cap Screws | |
ASTM A575 | Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades | |
ASTM A576 | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality | |
ASTM A577/A577M | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates | |
ASTM A578/A578M | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications | |
ASTM A579/A579M | Standard Specification for Superstrength Alloy Steel Forgings | |
ASTM A580/A580M | Standard Specification for Stainless Steel Wire | |
ASTM A581/A581M | Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods | |
ASTM A582/A582M | Standard Specification for Free-Machining Stainless Steel Bars | |
ASTM A586 | Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand | |
ASTM A587 | Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry | |
ASTM A588/A588M | Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance | |
ASTM A589/A589M | Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe | |
ASTM A592/A592M | Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels | |
ASTM A595/A595M | Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use | |
ASTM A596/A596M | Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens | |
ASTM A597/A597M | Standard Specification for Cast Tool Steel | |
ASTM A598/A598M | Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores | |
ASTM A599/A599M | Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet | |
ASTM A600 | Standard Specification for Tool Steel High Speed | |
ASTM A601/A601M | Standard Specification for Electrolytic Manganese Metal | |
ASTM A602 | Standard Specification for Automotive Malleable Iron Castings | |
ASTM A603 | Standard Specification for Zinc-Coated Steel Structural Wire Rope | |
ASTM A604/A604M | Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets | |
ASTM A606/A606M | Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance | |
ASTM A608/A608M | Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures | |
ASTM A609/A609M | Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof | |
ASTM A610 | Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size | |
ASTM A612/A612M | Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service | |
ASTM A615/A615M | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement | |
ASTM A618/A618M | Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing | |
ASTM A623M | Standard Specification for Tin Mill Products, General Requirements [Metric] | |
ASTM A623 | Standard Specification for Tin Mill Products, General Requirements | |
ASTM A624/A624M | Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced | |
ASTM A625/A625M | Standard Specification for Tin Mill Products, Black Plate, Single-Reduced | |
ASTM A626/A626M | Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced | |
ASTM A627 | Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities | |
ASTM A630 | Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate | |
ASTM A632 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service | |
ASTM A633/A633M | Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates | |
ASTM A635/A635M | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for | |
ASTM A636 | Standard Specification for Nickel Oxide Sinter | |
ASTM A638/A638M | Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service | |
ASTM A640 | Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable | |
ASTM A641/A641M | Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire | |
ASTM A644 | Standard Terminology Relating to Iron Castings | |
ASTM A645/A645M | Standard Specification for Pressure Vessel Plates, 5 % and 51 2 % Nickel Alloy Steels, Specially Heat Treated | |
ASTM A646/A646M | Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings | |
ASTM A648 | Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe | |
ASTM A649/A649M | Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery | |
ASTM A650/A650M | Standard Specification for Tin Mill Products, Black Plate, Double Reduced | |
ASTM A653/A653M | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | |
ASTM A656/A656M | Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability | |
ASTM A657/A657M | Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced | |
ASTM A659/A659M | Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled | |
ASTM A660/A660M | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service | |
ASTM A662/A662M | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service | |
ASTM A663/A663M | Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties | |
ASTM A664 | Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications | |
ASTM A666 | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar | |
ASTM A667/A667M | Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders | |
ASTM A668/A668M | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | |
ASTM A671/A671M | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures | |
ASTM A672/A672M | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures | |
ASTM A673/A673M | Standard Specification for Sampling Procedure for Impact Testing of Structural Steel | |
ASTM A674 | Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids | |
ASTM A675/A675M | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties | |
ASTM A677 | Standard Specification for Nonoriented Electrical Steel Fully Processed Types | |
ASTM A679/A679M | Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn | |
ASTM A681 | Standard Specification for Tool Steels Alloy | |
ASTM A683 | Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types | |
ASTM A684/A684M | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled | |
ASTM A686 | Standard Specification for Tool Steel, Carbon | |
ASTM A688/A688M | Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes | |
ASTM A689 | Standard Specification for Carbon and Alloy Steel Bars for Springs | |
ASTM A690/A690M | Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments | |
ASTM A691/A691M | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures | |
ASTM A693 | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | |
ASTM A694/A694M | Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service | |
ASTM A696 | Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components | |
ASTM A697/A697M | Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods | |
ASTM A698/A698M | Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields | |
ASTM A700 | Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment | |
ASTM A701/A701M | Standard Specification for Ferromanganese-Silicon | |
ASTM A702 | Standard Specification for Steel Fence Posts, Hot Wrought | |
ASTM A703/A703M | Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts | |
ASTM A704/A704M | Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement | |
ASTM A705/A705M | Standard Specification for Age-Hardening Stainless Steel Forgings | |
ASTM A706/A706M | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement | |
ASTM A707/A707M | Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service | |
ASTM A709/A709M | Standard Specification for Structural Steel for Bridges | |
ASTM A710/A710M | Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates | |
ASTM A711/A711M | Standard Specification for Steel Forging Stock | |
ASTM A712 | Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys | |
ASTM A713 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components | |
ASTM A716 | Standard Specification for Ductile Iron Culvert Pipe | |
ASTM A717/A717M | Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens | |
ASTM A719/A719M | Standard Test Method for Lamination Factor of Magnetic Materials | |
ASTM A720/A720M | Standard Test Method for Ductility of Nonoriented Electrical Steel | |
ASTM A721/A721M | Standard Test Method for Ductility of Oriented Electrical Steel | |
ASTM A722/A722M | Standard Specification for High-Strength Steel Bars for Prestressed Concrete | |
ASTM A723/A723M | Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application | |
ASTM A724/A724M | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels | |
ASTM A726 | Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types | |
ASTM A727/A727M | Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness | |
ASTM A729/A729M | Standard Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service | |
ASTM A732/A732M | Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures | |
ASTM A733 | Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples | |
ASTM A734/A734M | Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered | |
ASTM A735/A735M | Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service | |
ASTM A736/A736M | Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Steel | |
ASTM A737/A737M | Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel | |
ASTM A738/A738M | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service | |
ASTM A739 | Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both | |
ASTM A740 | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) | |
ASTM A741 | Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail | |
ASTM A742/A742M | Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe | |
ASTM A743/A743M | Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application | |
ASTM A744/A744M | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | |
ASTM A745/A745M | Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings | |
ASTM A746 | Standard Specification for Ductile Iron Gravity Sewer Pipe | |
ASTM A747/A747M | Standard Specification for Steel Castings, Stainless, Precipitation Hardening | |
ASTM A748/A748M | Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use | |
ASTM A749/A749M | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for | |
ASTM A751 | Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products | |
ASTM A753 | Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) | |
ASTM A754/A754M | Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence | |
ASTM A755/A755M | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products | |
ASTM A756 | Standard Specification for Stainless Anti-Friction Bearing Steel | |
ASTM A757/A757M | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service | |
ASTM A758/A758M | Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness | |
ASTM A759 | Standard Specification for Carbon Steel Crane Rails | |
ASTM A760/A760M | Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains | |
ASTM A761/A761M | Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches | |
ASTM A762/A762M | Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains | |
ASTM A763 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels | |
ASTM A764 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs | |
ASTM A765/A765M | Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements | |
ASTM A767/A767M | Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement | |
ASTM A768/A768M | Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts | |
ASTM A769/A769M | Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes | |
ASTM A770/A770M | Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications | |
ASTM A772/A772M | Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current | |
ASTM A773/A773M | Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs | |
ASTM A774/A774M | Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures | |
ASTM A775/A775M | Standard Specification for Epoxy-Coated Steel Reinforcing Bars | |
ASTM A778/A778M | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products | |
ASTM A779/A779M | Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete | |
ASTM A780/A780M | Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings | |
ASTM A781/A781M | Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use | |
ASTM A786/A786M | Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates | |
ASTM A787/A787M | Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing | |
ASTM A788/A788M | Standard Specification for Steel Forgings, General Requirements | |
ASTM A789/A789M | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service | |
ASTM A790/A790M | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe | |
ASTM A792/A792M - 10(2015) | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process | |
ASTM A793 | Standard Specification for Rolled Floor Plate, Stainless Steel | |
ASTM A794/A794M | Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled | |
ASTM A795/A795M | Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use | |
ASTM A796/A796M | Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications | |
ASTM A798/A798M | Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications | |
ASTM A799/A799M | Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content | |
ASTM A800/A800M | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof | |
ASTM A801 | Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) | |
ASTM A802 | Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination | |
ASTM A803/A803M | Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes | |
ASTM A804/A804M | Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens | |
ASTM A805/A805M | Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled | |
ASTM A807/A807M | Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications | |
ASTM A809 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire | |
ASTM A810 | Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh | |
ASTM A811 | Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques | |
ASTM A813/A813M | Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe | |
ASTM A814/A814M | Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe | |
ASTM A815/A815M | Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings | |
ASTM A817 | Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire | |
ASTM A818 | Standard Specification for Coppered Carbon Steel Wire | |
ASTM A820/A820M | Standard Specification for Steel Fibers for Fiber-Reinforced Concrete | |
ASTM A821/A821M | Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks | |
ASTM A822/A822M | Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service | |
ASTM A823 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings | |
ASTM A824 | Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence | |
ASTM A827/A827M | Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications | |
ASTM A829/A829M | Standard Specification for Alloy Structural Steel Plates | |
ASTM A830/A830M | Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements | |
ASTM A832/A832M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium | |
ASTM A833 | Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers | |
ASTM A834 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use | |
ASTM A835/A835M | Standard Specification for Sizes of Ferroalloys and Alloy Additives | |
ASTM A836/A836M | Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service | |
ASTM A837/A837M | Standard Specification for Steel Forgings, Alloy, for Carburizing Applications | |
ASTM A838 | Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications | |
ASTM A839 | Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications | |
ASTM A841/A841M | Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) | |
ASTM A842 | Standard Specification for Compacted Graphite Iron Castings | |
ASTM A844/A844M | Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process | |
ASTM A847/A847M | Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance | |
ASTM A848 | Standard Specification for Low-Carbon Magnetic Iron | |
ASTM A849 | Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe | |
ASTM A853 | Standard Specification for Steel Wire, Carbon, for General Use | |
ASTM A854/A854M | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire | |
ASTM A855/A855M | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand | |
ASTM A856/A856M | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire | |
ASTM A857/A857M | Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage | |
ASTM A858/A858M | Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service | |
ASTM A859/A859M | Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components | |
ASTM A860/A860M | Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings | |
ASTM A861 | Standard Specification for High-Silicon Iron Pipe and Fittings | |
ASTM A862/A862M | Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe | |
ASTM A865/A865M | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints | |
ASTM A866 | Standard Specification for Medium Carbon Anti-Friction Bearing Steel | |
ASTM A867 | Standard Specification for Iron-Silicon Relay Steels | |
ASTM A871/A871M | Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance | |
ASTM A872/A872M | Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments | |
ASTM A874/A874M | Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service | |
ASTM A875/A875M | Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process | |
ASTM A876 | Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types | |
ASTM A877/A877M | Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality | |
ASTM A878/A878M | Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality | |
ASTM A879/A879M | Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface | |
ASTM A881/A881M | Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete | |
ASTM A882/A882M | Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand | |
ASTM A884/A884M | Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement | |
ASTM A886/A886M | Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete | |
ASTM A887 | Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application | |
ASTM A888 | Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications | |
ASTM A889/A889M | Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame | |
ASTM A890/A890M | Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application | |
ASTM A891/A891M | Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels | |
ASTM A892 | Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels | |
ASTM A893/A893M | Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies | |
ASTM A895 | Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip | |
ASTM A896/A896M | Standard Practice for Conducting Case Studies on Galvanized Structures | |
ASTM A897/A897M | Standard Specification for Austempered Ductile Iron Castings | |
ASTM A898/A898M | Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes | |
ASTM A899 | Standard Specification for Steel Wire, Epoxy-Coated | |
ASTM A900/A900M | Standard Test Method for Lamination Factor of Amorphous Magnetic Strip | |
ASTM A901 | Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types | |
ASTM A902 | Standard Terminology Relating to Metallic Coated Steel Products | |
ASTM A903/A903M | Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection | |
ASTM A904 | Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts | |
ASTM A905 | Standard Specification for Steel Wire, Pressure Vessel Winding | |
ASTM A906/A906M | Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting | |
ASTM A908 | Standard Specification for Stainless Steel Needle Tubing | |
ASTM A909/A909M | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use | |
ASTM A910/A910M | Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete | |
ASTM A911/A911M | Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties | |
ASTM A912/A912M | Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens | |
ASTM A913/A913M | Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) | |
ASTM A914/A914M | Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements | |
ASTM A915/A915M | Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades | |
ASTM A917 | Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) | |
ASTM A918 | Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface | |
ASTM A920/A920M | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties | |
ASTM A921/A921M | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging | |
ASTM A922 | Standard Specification for Silicon Metal | |
ASTM A923 | Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels | |
ASTM A924/A924M | Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process | |
ASTM A925 | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand | |
ASTM A927/A927M | Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method | |
ASTM A928/A928M | Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal | |
ASTM A929/A929M | Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe | |
ASTM A930 | Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits | |
ASTM A931 | Standard Test Method for Tension Testing of Wire Ropes and Strand | |
ASTM A932/A932M | Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens | |
ASTM A934/A934M | Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars | |
ASTM A937/A937M | Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces | |
ASTM A938 | Standard Test Method for Torsion Testing of Wire | |
ASTM A939/A939M | Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings | |
ASTM A940/A940M | Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors | |
ASTM A941 | Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys | |
ASTM A942/A942M | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells | |
ASTM A943/A943M | Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes | |
ASTM A944 | Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens | |
ASTM A945/A945M | Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness | |
ASTM A947M | Standard Specification for Textured Stainless Steel Sheet [Metric] | |
ASTM A949/A949M | Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe | |
ASTM A950/A950M | Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling | |
ASTM A951/A951M | Standard Specification for Steel Wire for Masonry Joint Reinforcement | |
ASTM A952/A952M | Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links | |
ASTM A955/A955M | Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement | |
ASTM A956 | Standard Test Method for Leeb Hardness Testing of Steel Products | |
ASTM A957/A957M | Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use | |
ASTM A958/A958M | Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades | |
ASTM A959 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels | |
ASTM A960/A960M | Standard Specification for Common Requirements for Wrought Steel Piping Fittings | |
ASTM A961/A961M | Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications | |
ASTM A962/A962M | Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range | |
ASTM A964/A964M | Standard Specification for Corrugated Steel Box Culverts | |
ASTM A965/A965M | Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts | |
ASTM A966/A966M | Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current | |
ASTM A967/A967M | Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts | |
ASTM A968/A968M | Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service | |
ASTM A970/A970M | Standard Specification for Headed Steel Bars for Concrete Reinforcement | |
ASTM A971/A971M | Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils | |
ASTM A972/A972M | Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles | |
ASTM A973/A973M | Standard Specification for Grade 100 Alloy Steel Chain | |
ASTM A974 | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated) | |
ASTM A975 | Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) | |
ASTM A976 | Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application | |
ASTM A977/A977M | Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs | |
ASTM A978/A978M | Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications | |
ASTM A979/A979M | Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field | |
ASTM A980/A980M | Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled | |
ASTM A981/A981M | Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors | |
ASTM A982/A982M | Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils | |
ASTM A983/A983M | Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines | |
ASTM A985/A985M | Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts | |
ASTM A986/A986M | Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings | |
ASTM A987/A987M | Standard Practice for Measuring Shape Characteristics of Tin Mill Products | |
ASTM A988/A988M | Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service | |
ASTM A989/A989M | Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service | |
ASTM A990/A990M | Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service | |
ASTM A991/A991M | Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products | |
ASTM A992/A992M | Standard Specification for Structural Steel Shapes | |
ASTM A994 | Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys | |
ASTM A995/A995M | Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts | |
ASTM A996/A996M | Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement | |
ASTM A997 | Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination | |
ASTM A998/A998M | Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications | |
ASTM A999/A999M | Standard Specification for General Requirements for Alloy and Stainless Steel Pipe | |
ASTM A1000/A1000M | Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality | |
ASTM A1001 | Standard Specification for High Strength Steel Castings in Heavy Sections | |
ASTM A1002 | Standard Specification for Castings, Nickel-Aluminum Ordered Alloy | |
ASTM A1003/A1003M | Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members | |
ASTM A1004/A1004M | Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members | |
ASTM A1007 | Standard Specification for Carbon Steel Wire for Wire Rope | |
ASTM A1008/A1008M | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | |
ASTM A1009 | Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications | |
ASTM A1010/A1010M | Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip | |
ASTM A1011/A1011M | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength | |
ASTM A1012 | Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins | |
ASTM A1013 | Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method | |
ASTM A1014/A1014M | Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service | |
ASTM A1015 | Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications | |
ASTM A1016/A1016M | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | |
ASTM A1017/A1017M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten | |
ASTM A1018/A1018M | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength | |
ASTM A1020/A1020M | Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications | |
ASTM A1021/A1021M | Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service | |
ASTM A1022/A1022M | Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement | |
ASTM A1023/A1023M | Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes | |
ASTM A1024/A1024M | Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless | |
ASTM A1025/A1025M | Standard Specification for Ferroalloys and Other Alloying Materials, General Requirements | |
ASTM A1028 | Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils | |
ASTM A1030/A1030M | Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products | |
ASTM A1031/A1031M | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled | |
ASTM A1032 | Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe | |
ASTM A1033 | Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations | |
ASTM A1034/A1034M | Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars | |
ASTM A1035/A1035M | Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement | |
ASTM A1036 | Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers | |
ASTM A1037/A1037M | Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded | |
ASTM A1038 | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | |
ASTM A1039/A1039M | Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process | |
ASTM A1040 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels | |
ASTM A1043/A1043M | Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings | |
ASTM A1044/A1044M | Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete | |
ASTM A1045 | Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems | |
ASTM A1046/A1046M | Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process | |
ASTM A1047/A1047M | Standard Test Method for Pneumatic Leak Testing of Tubing | |
ASTM A1049/A1049M | Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components | |
ASTM A1053/A1053M | Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe | |
ASTM A1054 | Standard Specification for Sintered Ferrite Permanent Magnets | |
ASTM A1055/A1055M | Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars | |
ASTM A1056 | Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings | |
ASTM A1057/A1057M | Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process | |
ASTM A1058 | Standard Test Methods for Mechanical Testing of Steel Products—Metric | |
ASTM A1059/A1059M | Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products | |
ASTM A1060/A1060M | Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete | |
ASTM A1061/A1061M | Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand | |
ASTM A1062 | Standard Specification for Steel Castings Sampling | |
ASTM A1063/A1063M | Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process | |
ASTM A1064/A1064M | Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete | |
ASTM A1065/A1065M | Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point | |
ASTM A1066/A1066M | Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP) | |
ASTM A1067/A1067M | Standard Specification for Test Coupons for Steel Castings | |
ASTM A1068 | Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products | |
ASTM A1069/A1069M | Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes | |
ASTM A1070 | Standard Specification for Cast and Sintered Alnico Permanent Magnets | |
ASTM A1071/A1071M | Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys | |
ASTM A1072/A1072M | Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products | |
ASTM A1073/A1073M | Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet | |
ASTM A1074 | Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals | |
ASTM A1075 | Standard Specification for Flanged Steel U-Channel Posts | |
ASTM A1076/A1076M | Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel | |
ASTM A1077/A1077M | Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings | |
ASTM A1078/A1078M | Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement | |
ASTM A1079 | Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | |
ASTM A1080 | Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings | |
ASTM A1081/A1081M | Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand | |
ASTM A1082/A1082M | Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications | |
ASTM A1083/A1083M | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process | |
ASTM A1084 | Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels | |
ASTM A1085/A1085M | Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) | |
ASTM A1086 | Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types | |
ASTM A1087/A1087M | Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet | |
ASTM A1088 | Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP) | |
ASTM A1089/A1089M | Standard Specification for Highly Loaded Anti-Friction Bearing Steel | |
ASTM A1090/A1090M | Standard Specification for Forged Rings and Hollows Produced from Steels with Atmospheric Corrosion Resistance | |
ASTM A1091/A1091M | Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service | |
ASTM A1092 | Standard Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet | |
ASTM A1093/A1093M | Standard Specification for Electrolytic Plasma Treatment Processing of Conductive Materials | |
ASTM A1094/A1094M | Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement | |
ASTM A1095 | Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings | |
ASTM A1096/A1096M | Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement | |
ASTM A1097 | Standard Specification for Steel Casing Pipe, Electric-Fusion (Arc)-Welded (Outside Diameter of 10 in. and Larger) | |
ASTM A1098/A1098M | Standard Specification for Welded Austenitic Alloy Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s) | |
ASTM A1099/A1099M | Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels | |
ASTM A1100 | Standard Guide for Qualification and Control of Induction Heat Treating | |
ASTM A1101 | Standard Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets | |
ASTM A1102 | Standard Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets | |
ASTM A1103/A1103M | Standard Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications | |
ASTM A1106/A1106M | Standard Specification for Pressure Vessel Plate, Alloy Steel, Austenitic High Manganese for Cryogenic Application |
B[edit]
- B1-01 Standard Specification for Hard-Drawn Copper Wire
- B2-08 Standard Specification for Medium-Hard-Drawn Copper Wire
- B3-01(2007) Standard Specification for Soft or Annealed Copper Wire
- B5-00(2005) Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
- B6-08 Standard Specification for Zinc
- B8-04 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
- B9-90(2008) Standard Specification for Bronze Trolley Wire
- B16/B16M-05 Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
- B19-05 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
- B21/B21M-06 Standard Specification for Naval Brass Rod, Bar, and Shapes
- B22-08 Standard Specification for Bronze Castings for Bridges and Turntables
- B23-00(2005) Standard Specification for White Metal Bearing Alloys (Known Commercially as 'Babbitt Metal')
- B26/B26M-05 Standard Specification for Aluminum-Alloy Sand Castings
- B29-03 Standard Specification for Refined Lead
- B30-09 Standard Specification for Copper Alloys in Ingot Form
- B30-08a Standard Specification for Copper Alloys in Ingot Form CHINESE TRANSLATION
- B32-08 Standard Specification for Solder Metal
- B33-04 Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes
- B36/B36M-08a Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
- B37-08 Standard Specification for Aluminum for Use in Iron and Steel Manufacture
- B39-79(2008) Standard Specification for Nickel
- B42-02e1 Standard Specification for Seamless Copper Pipe, Standard Sizes
- B43-98(2004) Standard Specification for Seamless Red Brass Pipe, Standard Sizes
- B47-95a(2007) Standard Specification for Copper Trolley Wire
- B48-00(2005)e1 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
- B49-08a Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
- B61-08 Standard Specification for Steam or Valve Bronze Castings
- B62-09 Standard Specification for Composition Bronze or Ounce Metal Castings
- B63-07 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
- B66/B66M-06e1 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
- B67-05 Standard Specification for Car and Tender Journal Bearings, Lined
- B68-02 Standard Specification for Seamless Copper Tube, Bright Annealed
- B68M-99(2005) Standard Specification for Seamless Copper Tube, Bright Annealed [Metric]
- B69-08 Standard Specification for Rolled Zinc
- B70-90(2007) Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
- B75-02 Standard Specification for Seamless Copper Tube
- B75M-99(2005) Standard Specification for Seamless Copper Tube [Metric]
- B76-90(2007) Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
- B77-07 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
- B78-90(2007) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
- B80-07 Standard Specification for Magnesium-Alloy Sand Castings
- B84-07 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
- B85/B85M-08 Standard Specification for Aluminum-Alloy Die Castings
- B86-08 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
- B88-03 Standard Specification for Seamless Copper Water Tube
- B88M-05 Standard Specification for Seamless Copper Water Tube [Metric]
- B90/B90M-07 Standard Specification for Magnesium-Alloy Sheet and Plate
- B91-07 Standard Specification for Magnesium-Alloy Forgings
- B92/B92M-07 Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
- B93/B93M-07 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
- B94-07 Standard Specification for Magnesium-Alloy Die Castings
- B96/B96M-06 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
- B98/B98M-08 Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes
- B99/B99M-06 Standard Specification for Copper-Silicon Alloy Wire for General Applications
- B100-08 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
- B101-07 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
- B102-00(2005) Standard Specification for Lead- and Tin-Alloy Die Castings
- B103/B103M-09 Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
- B105-05 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
- B106-08 Standard Test Methods for Flexivity of Thermostat Metals
- B107/B107M-07 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
- B108/B108M-08 Standard Specification for Aluminum-Alloy Permanent Mold Castings
- B111/B111M-09 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
- B114-07 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
- B115-00(2004) Standard Specification for Electrolytic Copper Cathode
- B116-95(2007) Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage
- B117 Standard Practice for Operating Salt Spray (Fog) Apparatus
- B121/B121M-01(2006) Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
- B122/B122M-08 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
- B124/B124M-08a Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
- B127-05 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
- B129-07 Standard Specification for Cartridge Brass Cartridge Case Cups
- B130-08 Standard Specification for Commercial Bronze Strip for Bullet Jackets
- B131-07 Standard Specification for Copper Alloy Bullet Jacket Cups
- B134/B134M-08 Standard Specification for Brass Wire
- B135-08a Standard Specification for Seamless Brass Tube
- B135M-08a Standard Specification for Seamless Brass Tube [Metric]
- B136-84(2008)e1 Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
- B137-95(2004) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
- B138/B138M-06 Standard Specification for Manganese Bronze Rod, Bar, and Shapes
- B139/B139M-07 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
- B140/B140M-07 Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
- B148-97(2003)e1 Standard Specification for Aluminum-Bronze Sand Castings
- B150/B150M-08 Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
- B151/B151M-05 Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
- B152/B152M-06ae1 Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
- B153-05 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
- B154-05 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
- B159/B159M-05 Standard Specification for Phosphor Bronze Wire
- B160-05e1 Standard Specification for Nickel Rod and Bar
- B161-05e1 Standard Specification for Nickel Seamless Pipe and Tube
- B162-99(2005)e1 Standard Specification for Nickel Plate, Sheet, and Strip
- B163-08 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
- B164-03(2008) Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
- B165-05 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
- B166-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
- B167-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube
- B168-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip
- B169/B169M-05 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
- B170-99(2004) Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
- B171/B171M-09 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
- B172-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
- B173-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
- B174-02(2007)e1 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
- B176-08 Standard Specification for Copper-Alloy Die Castings
- B177-01(2006)e1 Standard Guide for Engineering Chromium Electroplating
- B179-06 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
- B183-79(2004)e1 Standard Practice for Preparation of Low-Carbon Steel for Electroplating
- B187/B187M-06 Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
- B188-02 Standard Specification for Seamless Copper Bus Pipe and Tube
- B189-05 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
- B193-02(2008) Standard Test Method for Resistivity of Electrical Conductor Materials
- B194-08 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
- B196/B196M-07 Standard Specification for Copper-Beryllium Alloy Rod and Bar
- B197/B197M-07 Standard Specification for Copper-Beryllium Alloy Wire
- B199-07 Standard Specification for Magnesium-Alloy Permanent Mold Castings
- B200-85(2004) Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
- B201-80(2004) Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
- B206/B206M-07 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
- B208-06 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
- B208-06 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings CHINESE TRANSLATION
- B209-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
- B209M-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
- B210-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
- B210M-05 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
- B211-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
- B211M-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
- B212-99(2006) Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- B213-03 Standard Test Method for Flow Rate of Metal Powders
- B214-07 Standard Test Method for Sieve Analysis of Metal Powders
- B215-08 Standard Practices for Sampling Metal Powders
- B216-97(2003) Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
- B221M-07 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
- B221-08 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
- B223-08 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
- B224-04 Standard Classification of Coppers
- B226-04 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
- B227-04 Standard Specification for Hard-Drawn Copper-Clad Steel Wire
- B228-04 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
- B229-04 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
- B230/B230M-07 Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
- B231/B231M-04 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
- B232/B232M-01e1 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
- B233-97(2007) Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
- B234-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
- B234M-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
- B236M-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
- B236-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
- B237-01(2006) Standard Specification for Refined Antimony
- B240-07e1 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
- B241/B241M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
- B242-99(2004)e1 Standard Guide for Preparation of High-Carbon Steel for Electroplating
- B243-09 Standard Terminology of Powder Metallurgy
- B244-09 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- B246-05 Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
- B247-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
- B247M-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
- B248-07 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
- B248M-07 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar [Metric]
- B249/B249M-06 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
- B250/B250M-07 Standard Specification for General Requirements for Wrought Copper Alloy Wire
- B251M-97(2003) Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]
- B251-02e1 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
- B252-92(2004) Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
- B253-87(2005)e1 Standard Guide for Preparation of Aluminum Alloys for Electroplating
- B254-92(2004)e1 Standard Practice for Preparation of and Electroplating on Stainless Steel
- B258-02(2008) Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
- B263-04 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
- B265-09a Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
- B267-07 Standard Specification for Wire for Use In Wire-Wound Resistors
- B271-08 Standard Specification for Copper-Base Alloy Centrifugal Castings
- B272-07 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
- B275-05 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
- B276-05e1 Standard Test Method for Apparent Porosity in Cemented Carbides
- B277-95(2006) Standard Test Method for Hardness of Electrical Contact Materials
- B279-04 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
- B280-08 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
- B281-88(2008) Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
- B283-09 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
- B286-07 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
- B294-92(2006) Standard Test Method for Hardness Testing of Cemented Carbides
- B296-03(2008) Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
- B298-07 Standard Specification for Silver-Coated Soft or Annealed Copper Wire
- B299-08 Standard Specification for Titanium Sponge
- B301/B301M-08 Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
- B302-07 Standard Specification for Threadless Copper Pipe, Standard Sizes
- B306-09 Standard Specification for Copper Drainage Tube (DWV)
- B308/B308M-02 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
- B311-08 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
- B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
- B313/B313M-02e1 Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
- B315-06 Standard Specification for Seamless Copper Alloy Pipe and Tube
- B316/B316M-02 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
- B317/B317M-07 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
- B319-91(2004) Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
- B320-60(2008) Standard Practice for Preparation of Iron Castings for Electroplating
- B322-99(2004) Standard Guide for Cleaning Metals Prior to Electroplating
- B324-01(2007) Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
- B327-09 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
- B328-96(2003)e1 Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings
- B329-06 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
- B330-07 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
- B331-95(2002) Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
- B333-03(2008) Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
- B335-03(2008) Standard Specification for Nickel-Molybdenum Alloy Rod
- B338-09 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
- B339-00(2005) Standard Specification for Pig Tin
- B343-92a(2004)e1 Standard Practice for Preparation of Nickel for Electroplating with Nickel
- B344-01 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
- B345/B345M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
- B348-09 Standard Specification for Titanium and Titanium Alloy Bars and Billets
- B349/B349M-09 Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
- B350/B350M-02(2006) Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
- B351/B351M-08e1 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
- B352/B352M-02(2006) Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
- B353-07 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
- B354-05 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
- B355-06 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
- B359/B359M-02(2006) Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
- B360-01 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
- B361-08 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
- B362-91(2008) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
- B363-06a Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
- B364-96(2009) Standard Specification for Tantalum and Tantalum Alloy Ingots
- B365-98(2004) Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
- B366-04be1 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
- B367-09 Standard Specification for Titanium and Titanium Alloy Castings
- B368-09 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
- B369-09 Standard Specification for Copper-Nickel Alloy Castings
- B370-09 Standard Specification for Copper Sheet and Strip for Building Construction
- B371/B371M-08 Standard Specification for Copper-Zinc-Silicon Alloy Rod
- B372-97(2003) Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
- B373-00(2006) Standard Specification for Aluminum Foil for Capacitors
- B374-06 Standard Terminology Relating to Electroplating
- B379-04 Standard Specification for Phosphorized Coppers—Refinery Shapes
- B380-97(2008)e1 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
- B381-09 Standard Specification for Titanium and Titanium Alloy Forgings
- B386-03 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
- B387-90(2001) Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
- B388-06 Standard Specification for Thermostat Metal Sheet and Strip
- B389-81(2008) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
- B390-92(2006) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
- B391-03 Standard Specification for Niobium and Niobium Alloy Ingots
- B392-03 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
- B393-05 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
- B394-03 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
- B395/B395M-08 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
- B398/B398M-02(2007) Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
- B399/B399M-04 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
- B400-08 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
- B401-04 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
- B403-07 Standard Specification for Magnesium-Alloy Investment Castings
- B406-96(2005) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
- B407-08a Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
- B408-06 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
- B409-06e1 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
- B411/B411M-08 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
- B413-97a(2008) Standard Specification for Refined Silver
- B415-98(2007) Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
- B416-98(2007) Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
- B417-00(2006)e1 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- B418-08 Standard Specification for Cast and Wrought Galvanic Zinc Anodes
- B422-08a Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
- B423-05 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
- B424-05 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
- B425-99(2005) Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
- B427-02 Standard Specification for Gear Bronze Alloy Castings
- B428-09 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
- B429/B429M-06 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
- B430-97(2006)e1 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
- B432-09 Standard Specification for Copper and Copper Alloy Clad Steel Plate
- B434-06 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
- B435-06 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
- B438-08 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
- B439-08 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
- B440-00(2005) Standard Specification for Cadmium
- B441-04 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
- B443-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
- B444-06 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
- B446-03(2008) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar
- B447-07 Standard Specification for Welded Copper Tube
- B449-93(2004) Standard Specification for Chromates on Aluminum
- B452-02 Standard Specification for Copper-Clad Steel Wire for Electronic Application
- B453/B453M-08 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
- B455-05 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
- B456-03 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
- B457-67(2008)e1 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
- B462-06 Specification for Forged or Rolled UNS N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665, N10675,N10629, N08031,N06045, N06025, & R20033 Alloy Pipe Flanges, Forged Fitting, & Values & Parts for Corrosive
- B463-04 Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip
- B464-05 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe
- B465-04 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
- B466/B466M-07 Standard Specification for Seamless Copper-Nickel Pipe and Tube
- B467-88(2003) Standard Specification for Welded Copper-Nickel Pipe
- B468-04 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes
- B470-02(2007) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
- B472-04a Standard Specification for Nickel Alloy Billets and Bars for Reforging
- B473-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
- B474-03 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
- B475-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
- B476-01(2006) Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
- B477-97(2008) Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
- B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
- B479-06 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
- B480-88(2006) Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
- B481-68(2008) Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
- B482-85(2008) Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
- B483/B483M-03 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications
- B487-85(2007) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
- B488-01(2006) Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
- B489-85(2008)e1 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
- B490-09 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
- B491/B491M-06 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
- B493/B493M-08 Standard Specification for Zirconium and Zirconium Alloy Forgings
- B494/B494M-08 Standard Specification for Primary Zirconium
- B495-05 Standard Specification for Zirconium and Zirconium Alloy Ingots
- B496-04 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
- B497-00(2006) Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts
- B498/B498M-08 Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
- B499-09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- B500/B500M-09 Standard Specification for Metallic Coated Stranded Steel Core for Use in Overhead Electrical Conductors
- B501-04 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
- B502-02(2007) Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced
- B504-90(2007) Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
- B505/B505M-08a Standard Specification for Copper Alloy Continuous Castings
- B506-09 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
- B507-86(2008)e1 Standard Practice for Design of Articles to Be Electroplated on Racks
- B508-08 Standard Specification for Copper Alloy Strip for Flexible Metal Hose
- B511-01(2005) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
- B512-04 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
- B514-05 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
- B515-95(2002) Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
- B516-03(2009) Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes
- B517-05 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
- B520-93(2007) Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
- B521-98(2004) Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
- B522-01(2006) Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
- B523/B523M-07 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
- B524/B524M-99(2005) Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
- B527-06 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
- B528-05 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
- B530-02 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
- B532-85(2007) Standard Specification for Appearance of Electroplated Plastic Surfaces
- B533-85(2004) Standard Test Method for Peel Strength of Metal Electroplated Plastics
- B534-07 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
- B535-06 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
- B536-07 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
- B537-70(2007) Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
- B539-02(2008) Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
- B540-97(2008) Standard Specification for Palladium Electrical Contact Alloy
- B541-01(2006) Standard Specification for Gold Electrical Contact Alloy
- B542-07 Standard Terminology Relating to Electrical Contacts and Their Use
- B543-07e1 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
- B545-97(2004)e1 Standard Specification for Electrodeposited Coatings of Tin
- B546-04 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
- B547/B547M-02 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
- B548-03 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
- B549-04 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW)
- B550/B550M-07 Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
- B551/B551M-07 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
- B552-08 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
- B555-86(2007) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
- B556-90(2007) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
- B557-06 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
- B557M-07e1 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
- B558-79(2008) Standard Practice for Preparation of Nickel Alloys for Electroplating
- B559-93(2007) Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
- B560-00(2005) Standard Specification for Modern Pewter Alloys
- B561-94(2005) Standard Specification for Refined Platinum
- B562-95(2005) Standard Specification for Refined Gold
- B563-01(2006) Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
- B564-06a Standard Specification for Nickel Alloy Forgings
- B565-04 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
- B566-04a Standard Specification for Copper-Clad Aluminum Wire
- B567-98(2003) Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
- B568-98(2004) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
- B569-09 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
- B570-06 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
- B571-97(2008)e1 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
- B572-06 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
- B573-06 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod
- B574-06e1 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
- B575-06 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip
- B576-94(2005) Standard Guide for Arc Erosion Testing of Electrical Contact Materials
- B577-93(2004)e1 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
- B578-87(2004) Standard Test Method for Microhardness of Electroplated Coatings
- B579-73(2004) Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
- B580-79(2004) Standard Specification for Anodic Oxide Coatings on Aluminum
- B581-02(2008) Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
- B582-07 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
- B584-08a Standard Specification for Copper Alloy Sand Castings for General Applications
- B584-08a Standard Specification for Copper Alloy Sand Castings for General Applications CHINESE TRANSLATION
- B587-08 Standard Specification for Welded Brass Tube
- B588-88(2006) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
- B589-94(2005) Standard Specification for Refined Palladium
- B591-09 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
- B592-01(2006) Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
- B593-96(2003)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
- B594-06 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
- B595-95(2006) Standard Specification for Sintered Aluminum Structural Parts
- B596-89(2006) Standard Specification for Gold-Copper Alloy Electrical Contact Material
- B598-09 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
- B599-92(2009)e1 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
- B600-91(2002)e1 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
- B601-07 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
- B602-88(2005) Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
- B603-07 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
- B604-91(2008) Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
- B605-95a(2004) Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
- B606-08 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
- B607-91(2008) Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
- B608-07 Standard Specification for Welded Copper-Alloy Pipe
- B609/B609M-99(2004) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
- B610-08 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
- B611-85(2005) Standard Test Method for Abrasive Wear Resistance of Cemented Carbides
- B613-76(2006) Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
- B614-05 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
- B615-79(2006) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
- B616-96(2006) Standard Specification for Refined Rhodium
- B617-98(2004) Standard Specification for Coin Silver Electrical Contact Alloy
- B618/B618M-08 Standard Specification for Aluminum-Alloy Investment Castings
- B619-06 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
- B620-03(2008) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
- B621-02(2006) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
- B622-06 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
- B624-07 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
- B625-05 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip
- B626-06 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
- B628-98(2004) Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
- B629-77(2008) Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
- B630-88(2006) Standard Practice for Preparation of Chromium for Electroplating with Chromium
- B631-93(2004) Standard Specification for Silver-Tungsten Electrical Contact Materials
- B632/B632M-08 Standard Specification for Aluminum-Alloy Rolled Tread Plate
- B633-07 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
- B634-88(2004)e1 Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
- B635-00(2004)e1 Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
- B636-84(2006)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
- B637-06e1 Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
- B639-02(2008) Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
- B640-07 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
- B643-00(2005) Standard Specification for Copper-Beryllium Alloy Seamless Tube
- B644-05 Standard Specification for Copper Alloy Addition Agents
- B645-07 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
- B646-06a Standard Practice for Fracture Toughness Testing of Aluminum Alloys
- B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
- B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
- B649-06 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
- B650-95(2008) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
- B651-83(2006) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
- B652/B652M-04 Standard Specification for Niobium-Hafnium Alloy Ingots
- B653/B653M-06 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
- B654/B654M-04 Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
- B655/B655M-04 Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire
- B657-05 Guide for Metallographic Identification of Microstructure in Cemented Carbides
- B658/B658M-06 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
- B659-90(2008)e1 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
- B660-08 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
- B661-06 Standard Practice for Heat Treatment of Magnesium Alloys
- B662-94(2006) Standard Specification for Silver-Molybdenum Electrical Contact Material
- B663-94(2006) Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
- B664-90(2006) Standard Specification for 80% Silver-20 % Graphite Sliding Contact Material
- B665-08 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
- B666/B666M-08 Standard Practice for Identification Marking of Aluminum and Magnesium Products
- B667-97(2009) Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
- B668-05 Standard Specification for UNS N08028 Seamless Pipe and Tube
- B670-07 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
- B671-81(2005) Standard Specification for Refined Iridium
- B672-02(2007) Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
- B673-05e1 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
- B674-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
- B675-02(2007) Standard Specification for UNS N08367 Welded Pipe
- B676-03(2009) Standard Specification for UNS N08367 Welded Tube
- B677-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
- B678-86(2006) Standard Test Method for Solderability of Metallic-Coated Products
- B679-98(2004)e1 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
- B680-80(2004) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
- B682-01 Standard Specification for Standard Metric Sizes of Electrical Conductors
- B683-01(2006) Standard Specification for Pure Palladium Electrical Contact Material
- B684-97(2008) Standard Specification for Platinum-Iridium Electrical Contact Materials
- B685-01(2006) Standard Specification for Palladium-Copper Electrical Contact Material
- B686/B686M-08 Standard Specification for Aluminum Alloy Castings, High-Strength
- B687-99(2005)e1 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
- B688-96(2009) Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
- B689-97(2008) Standard Specification for Electroplated Engineering Nickel Coatings
- B690-02(2007) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
- B691-02(2007) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
- B692-90(2006) Standard Specification for 75% Silver-25 % Graphite Sliding Contact Material
- B693-91(2006) Standard Specification for Silver-Nickel Electrical Contact Materials
- B694-03 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
- B695-04 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
- B696-00(2004)e1 Standard Specification for Coatings of Cadmium Mechanically Deposited
- B697-88(2005) Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
- B698-02 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
- B699-86(2008) Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
- B700-08 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
- B701/B701M-06 Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
- B702-93(2004) Standard Specification for Copper-Tungsten Electrical Contact Material
- B703-05 Standard Test Method for Apparent Density of Powders Using Arnold Meter
- B704-03 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
- B705-05 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
- B706-00(2006) Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
- B708-05 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
- B709-04(2009) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip
- B710-04 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
- B711-05 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
- B712-93(2006) Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
- B715-96(2001) Standard Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications
- B717-96(2006) Standard Specification for Refined Ruthenium
- B718-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
- B719-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
- B722-06 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
- B723-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
- B724-00(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
- B725-05 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
- B726-02(2006) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
- B727-04 Standard Practice for Preparation of Plastics Materials for Electroplating
- B729-05 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
- B730-08 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
- B731-96(2006) Standard Specification for 60% Palladium-40 % Silver Electrical Contact Material
- B733-04 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
- B734-97(2008) Standard Specification for Electrodeposited Copper for Engineering Uses
- B735-06 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
- B736-00(2006) Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
- B737-05 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
- B738-03(2008) Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
- B739-03(2008) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
- B740-02 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
- B742-90(2006) Standard Specification for Fine Silver Electrical Contact Fabricated Material
- B743-06 Standard Specification for Seamless Copper Tube in Coils
- B744/B744M-05 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
- B745/B745M-97(2005) Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
- B746/B746M-02(2007) Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
- B747-07 Standard Specification for Copper-Zirconium Alloy Sheet and Strip
- B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- B749-03 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
- B750-08 Standard Specification for Galfan (Zinc-5%/10% Aluminum-mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
- B751-08 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
- B752-06 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
- B753-07 Standard Specification for Thermostat Component Alloys
- B754-89(2005) Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
- B755-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
- B756-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
- B757-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
- B758-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
- B759-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
- B760-07 Standard Specification for Tungsten Plate, Sheet, and Foil
- B761-06 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
- B762-90(2005) Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
- B763-08a Standard Specification for Copper Alloy Sand Castings for Valve Applications
- B764-04 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
- B765-03(2008) Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
- B766-86(2008) Standard Specification for Electrodeposited Coatings of Cadmium
- B767-88(2006) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
- B768-99(2004) Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
- B769-07 Standard Test Method for Shear Testing of Aluminum Alloys
- B770-08 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
- B771-87(2006) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
- B772-97(2008) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
- B773-96(2008) Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies
- B774-00(2005)e1 Standard Specification for Low Melting Point Alloys
- B775-08 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
- B776-07 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
- B777-07 Standard Specification for Tungsten Base, High-Density Metal
- B778-02(2007) Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
- B779-03 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
- B780-98(2004) Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
- B781-93a(2006) Standard Guide for Silver-Cadmium Oxide Contact Material
- B783-04 Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts
- B784-01(2006) Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
- B786-08 Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
- B787/B787M-04 Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
- B788/B788M-04 Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
- B789/B789M-99(2005) Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
- B790/B790M-00(2006) Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
- B792-08 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
- B793-08 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
- B794-97(2009) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
- B795-07 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
- B796-07 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (PF) Applications
- B797-93(2007) Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts
- B798-95(2005) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
- B799-95(2005) Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
- B800-05 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
- B801-07 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
- B802/B802M-08 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
- B803-08 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
- B804-02(2007) Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
- B805-06 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
- B806-08a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
- B806-08a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications CHINESE TRANSLATION
- B807/B807M-06 Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
- B808-05 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
- B809-95(2008) Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (「Flowers-of-Sulfur」
- B810-01a(2006) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
- B811-02(2007) Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
- B812-96(2008) Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
- B813-00(2009) Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
- B814-06 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
- B815-02(2006) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
- B816-00(2004)e1 Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
- B817-08 Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components
- B818-03(2008) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
- B819-00(2006) Standard Specification for Seamless Copper Tube for Medical Gas Systems
- B820-09 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
- B821-02(2007) Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
- B822-02 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
- B823-01 Standard Specification for Materials for Nonferrous Powder Metallurgy (P/M) Structural Parts
- B824-09 Standard Specification for General Requirements for Copper Alloy Castings
- B824-04 Standard Specification for General Requirements for Copper Alloy Castings CHINESE TRANSLATION
- B825-02(2008) Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
- B826-03 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
- B827-05 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
- B828-02 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
- B829-04a(2009) Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
- B830-97(2003) Standard Specification for Uniform Test Methods and Frequency
- B831-05 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- B832-93(2008) Standard Guide for Electroforming with Nickel and Copper
- B833-06 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
- B834-95(2003) Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
- B835-04 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
- B836-00(2005) Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
- B837-01 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems
- B839-04 Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod—Inclined Wedge Method
- B840-99(2004) Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
- B841-99(2004) Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
- B842-99(2005) Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
- B843-07 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
- B844-98(2004) Standard Guide for Silver-Tin Oxide Contact Material
- B845-97(2008)e1 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
- B846-06a Standard Terminology for Copper and Copper Alloys
- B846-06a Standard Terminology for Copper and Copper Alloys CHINESE TRANSLATION
- B848-05 Specification for Powder Forged (P/F) Ferrous Materials
- B849-02(2007) Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
- B850-98(2004) Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
- B851-04 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
- B852-08 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
- B853-07 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
- B854-98(2004) Standard Guide for Measuring Electrical Contact Intermittences
- B855-06 Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
- B856-03 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
- B857-09 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
- B858-06 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
- B859-03(2008)e1 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
- B860-09 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
- B861-08a Standard Specification for Titanium and Titanium Alloy Seamless Pipe
- B862-09 Standard Specification for Titanium and Titanium Alloy Welded Pipe
- B863-09 Standard Specification for Titanium and Titanium Alloy Wire
- B864/B864M-08 Standard Specification for Corrugated Aluminum Box Culverts
- B865-04 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
- B866-95(2008) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
- B867-95(2008) Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
- B868-96(2008) Standard Practice for Contact Performance Classification of Electrical Connection Systems
- B869-07 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
- B870-08 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
- B871-01(2007) Standard Test Method for Tear Testing of Aluminum Alloy Products
- B872-06 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
- B873-01(2007) Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
- B874-96(2008) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
- B875-96(2008) Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
- B877-96(2008) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
- B878-97(2009) Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
- B879-97(2008)e1 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
- B880-03(2008) Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
- B881-05 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
- B882-05 Specification for Pre-Patinated Copper for Architectural Applications
- B883-05 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials
- B884-05 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
- B885-09 Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
- B886-03(2008) Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
- B887-03(2008)e1 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
- B888-08 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
- B890-07 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- B891-98(2004) Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins
- B892-03 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
- B893-98(2008) Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
- B894-03 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
- B895-05 Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (P/M) Parts/Specimens by Immersion in a Sodium Chloride Solution
- B896-99(2005) Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
- B897-03 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo and Block Ingot
- B898-05e1 Standard Specification for Reactive and Refractory Metal Clad Plate
- B899-06 Standard Terminology Relating to Non-ferrous Metals and Alloys
- B900-04 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
- B901-04 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
- B902-04a Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
- B903-00(2005) Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
- B904-00(2004) Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
- B905-00(2005) Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
- B906-02(2006) Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
- B907-05 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
- B908-03(2008) Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
- B909-00(2006) Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
- B910/B910M-07 Standard Specification for Annealed Copper-Clad Steel Wire
- B911/B911M-05 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
- B912-02(2008)e1 Standard Specification for Passivation of Stainless Steels Using Electropolishing
- B913-05 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
- B914-03(2008) Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
- B915-01(2007) Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating
- B916-01(2007) Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
- B917/B917M-08 Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
- B918/B918M-09 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
- B919-01(2006) Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
- B920-01(2006)e1 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
- B921-08 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
- B922-02(2008) Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
- B923-02(2008) Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
- B924-02(2006) Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
- B925-08 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
- B926-03 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
- B927/B927M-08a Standard Specification for Brass Rod, Bar, and Shapes
- B928/B928M-07 Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments
- B929-05 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
- B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
- B931-09 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts
- B932-04 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip
- B933-09 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
- B934-04a Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
- B935-05 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials
- B936-08 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
- B937-04 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
- B938-04 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510)
- B939-05 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials
- B940-05 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
- B941-05 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
- B942-05 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
- B943-05 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
- B944-06 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
- B945-06 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
- B946-06 Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products
- B947-06 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
- B949-08 Standard Specification for General Requirements for Zinc and Zinc Alloy Products
- B950-06 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
- B951-08 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
- B952-08 Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
- B953-07 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
- B954-07 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
- B955/B955M-08 Standard Specification for Aluminum-Alloy Centrifugal Castings
- B956-07e2 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
- B957-08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors
- B958-08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
- B960-08 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
- B961-08 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application
- B962-08 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes' Principle
- B963-08 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes' Principle
- B964-09 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- B965-09 Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
- B967/B967M-09 Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
- B994/B994M-15 Standard Specification for Nickel-Cobalt Alloy Coating
C[edit]
- ASTM C31 Standard Practice for Making and Curing Concrete Test Specimens in the Field
- ASTM C33 Standard Test Method for Fine and coarse aggregates
- ASTM C39 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C91 Cement Standards and Concrete Standards
- ASTM C91 - 05 Standard Specification for Masonry Cement
- ASTM C150 Standard Specification for Portland Cement
- ASTM C309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
- ASTM C595Standard Specification for Blended Hydraulic Cements pertains to blended hydraulic cements for both general and special applications, using slag or pozzolan, or both, with portland cement or portland cement clinker or slag with lime.
- ASTM C618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
- ASTM C813-90 Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
- ASTM C857-14 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
- ASTM C955 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
- ASTM C1112 Standard Guide for Application of Radiation Monitors to the Control and Physical Security of Special Nuclear Material
The standard was withdrawn in 2014 without replacement.[2] - ASTM C1130-17 Standard Practice for Calibration of Thin Heat Flux Transducers
- ASTM C1155 Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
- ASTM C1157Standard Performance Specification for Hydraulic Cement covers hydraulic cements for both general and special applications.
- ASTM C1270 Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
- ASTM C1271 Standard Test Method for X-Ray Spectrometric Analysis of Lime and Limestone
- ASTM C1321 - 04 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
- ASTM C0141 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducer
- ASTM C1349 Standard Specification for Architectural Flat Glass Clad Polycarbonate
D[edit]
- ASTM D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
- ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D97 Pour Point
- ASTM D149 Dielectric Strength
- ASTM D256 Impact Strength
- ASTM D421 - 85(2007) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants [1]
- ASTM D422 - 63(2007)e2 Standard Test Method for Particle-Size Analysis of Soils [2]
- ASTM D531 -00(2010) Standard Test Method for Rubber Property-Pusey and Jones Indentation
- ASTM D543 Chemical Resistance
- ASTM D570 Water Absorption
- ASTM D638 Standard Test Method for Tensile Properties of Plastics
- ASTM D698 - 12e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3)) [3]
- ASTM D854 - 14 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer [4]
- ASTM D1044 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
- ASTM D1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
- ASTM D1140 - 14 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing [5]
- ASTM D1193 Standard Specification for Reagent Water [3]
- ASTM D1457 Elongation
- ASTM D1556 / D1556M - 15 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method [6]
- ASTM D1557 - 12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) [7]
- ASTM D1708 Tensile Strength
- ASTM D1746 Standard Test Method for Transparency of Plastic Sheeting
- ASTM D1883 - 14 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils [8]
- ASTM D1894 Coefficient of Friction
- ASTM D2156 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
- ASTM D2166 / D2166M - 13 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil [9]
- ASTM D2216 - 10 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass [10]
- ASTM D2240 Hardness
- ASTM D2412 Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
- ASTM D2434-68(2006) Standard Test Method for Permeability of Granular Soils (Constant Head) (Withdrawn 2015) [11]
- ASTM D2435 / D2435M - 11 Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading [12]
- ASTM D2487 - 11 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) [13]
- ASTM D2488 - 09a Standard Practice for Description and Identification of Soils (Visual-Manual Procedure) [ds/D2488.htm
- ASTM D3039 / D3039M Standard Test Method for Tensile Properties for Polymer Matrix Composite Materials
- ASTM D3080 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
- ASTM D3740 - 12a Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction [14]
- ASTM D3786 Bursting strength for Knit fabric and non woven material
- ASTM D4123-82(1995) Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures
- ASTM D4220 / D4220M - 14 Standard Practices for Preserving and Transporting Soil Samples [15]
- ASTM D4236 - 94(2005) Standard Practice for Labeling Art Materials for Chronic Health Hazards [16]
- ASTM D4318 - 10e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils [17]
- ASTM D4356 Standard Practice for Establishing Consistent Test Method Tolerances
- ASTM D5084 - 10 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter [18]
- ASTM D5116 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products
- ASTM D5162-08 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
- ASTM D5375 Standard Test Methods for Liner removal at High Speeds from Pressure-Sensitive Label Stock
- ASTM D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
- ASTM D6252 Standard Test Method for Peel Adhesion of Pressure Sensitive Label Stocks at 90° Angle
- ASTM D6484 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
- ASTM D6712 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
- ASTM D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
- ASTM D6938 - 10 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) [19]
- ASTM D6913 - 04(2009)e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis [20]
- ASTM D7240 Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)
- ASTM D7264-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
- ASTM D7298-06 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
- ASTM D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- ASTM D7490 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
- ASTM D7547 Aviation fuel U91
- ASTM D7913 / D7913M Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
E[edit]
- ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials.
- ASTM E18 Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
- ASTM E21 Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E31 Healthcare Informatics
- ASTM E45 Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials
- ASTM E96 Standard Test Methods for Water Vapor Transmission of Materials
- ASTM E112 Test Methods for Determining Average Grain Size
- ASTM E119 Standard Test Methods for Fire Tests of Building Construction and Materials
- ASTM E139 Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
- ASTM E150 Practice for Conducting Creep and Creep-Rupture Tension Tests of Metallic Materials Under Conditions of Rapid Heating and Short Times
- ASTM E151 Practice for Tension Tests of Metallic Materials at Elevated Temperatures with Rapid Heating and Conventional or Rapid Strain Rates
- ASTM E155 Reference Radiographs for Inspection of Aluminum and Magnesium Castings
- ASTM E165 Standard Practice for Liquid Penetrant Examination
- ASTM E290 Standard Test Methods for Bend Testing of Material for Ductility
- ASTM E292 Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
- ASTM E328 Methods for Stress-Relaxation Tests for Materials and Structures
- ASTM E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
- ASTM E407 Standard Practice for Microetching Metals and Alloys [4]
- ASTM E446 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
- ASTM E460 Practice for Determining Effect of Packaging on Food and Beverage Products During Storage
- ASTM E566 Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals
- ASTM E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
- ASTM E779 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
- ASTM E903 Standard Test Method for Solar Absorbance, Reflectance and Transmittance of Materials Using Integrating Spheres
- ASTM E1155 Standard Test Method for Determining FF Flatness and FL Levelness Numbers, pertaining primarily to cast-in-place concrete floors
- ASTM E1169 Standard Guide for Conducting Ruggedness Tests
- ASTM E1316: 'Standard Terminology for Nondestructive Examinations'
- ASTM E1417 Standard Practice for Liquid Penetrant Testing
- ASTM E1444 Standard Practice for Magnetic Particle Testing
- ASTM E1488 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
- ASTM E1527 Standard Practice for Environmental Site Assessments
- ASTM E1558 Standard Guide for Electrolytic Polishing of Metallographic Specimens
- ASTM E1751 Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations
- ASTM E1870 Test Method for Odor and Taste Transfer from Polymeric Packaging Film
- ASTM E2369 Standard Specification for Continuity of Care Record (CCR)
- ASTM E2500 Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment
F[edit]
- ASTM F67 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)[5]
- ASTM F75 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)[5]
- ASTM F86 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants[5]
- ASTM F90 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)[5]
- ASTM F136 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)[5]
- ASTM F138 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)[5]
- ASTM F139 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)[5]
- ASTM F432 Standard Specification for Roof and Rock Bolts and Accessories
- ASTM F436 Standard Specification for Hardened Steel Washers
- ASTM F560 Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)[5]
- ASTM F562 Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)[5]
- ASTM F568M Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners. Withdrawn January 2012 due to ISO 898-1.[6]
- ASTM F571 Standard Practice for Installation of Exit Devices in Security Areas
- ASTM F601 Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants[5]
- ASTM F606 Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets
- ASTM F620 Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition[5]
- ASTM F621 Standard Specification for Stainless Steel Forgings for Surgical Implants[5]
- ASTM F626 Standard Specification for Fence Fittings
- ASTM F629 Standard Practice for Radiography of Cast Metallic Surgical Implants[5]
- ASTM F688 Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)[5]
- ASTM F756 Standard Practice for Assessment of Hemolytic Properties of Materials
- ASTM F792 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
- ASTM F799 Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)[5]
- ASTM F876 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
- ASTM F877 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
- ASTM F883 Standard Performance Specification for Padlocks
- ASTM F899 Standard Specification for Wrought Stainless Steels for Surgical Instruments[5]
- ASTM F961 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)[5]
- ASTM F963 Standard Consumer Safety Specification for Toy Safety
- ASTM F1058 Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)[5]
- ASTM F1091 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)[5]
- ASTM F1108 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)[5]
- ASTM F1295 Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)[5]
- ASTM F1314 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)[5]
- ASTM F1350 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)[5]
- ASTM F1377 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)[5]
- ASTM F1450 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities
- ASTM F1472 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)[5]
- ASTM F1537 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)[5]
- ASTM F1575 Test Method for Determining Bending Yield Moment of Nails
- ASTM F1577 Standard Test Methods for Detention Locks for Swinging Doors
- ASTM F1580 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants[5]
- ASTM F1586 Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)[5]
- ASTM F1592 Standard Test Methods for Detention Hollow Metal Vision Systems
- ASTM F1643 Standard Test Methods for Detention Sliding Door Locking Device Assembly
- ASTM F1667 Standard Specification for Driven Fasteners: Nails, Spikes and Staples
- ASTM F1713 Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)[5]
- ASTM F1807 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
- ASTM F1813 Standard Specification for Wrought Titanium–12 Molybdenum–6 Zirconium–2 Iron Alloy for Surgical Implant (UNS R58120)[5]
- ASTM F1886 Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection
- ASTM F1915 Standard Test Methods for Glazing for Detention Facilities
- ASTM F1929 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
- ASTM F2005 Standard Terminology for Nickel-Titanium Shape Memory Alloys[5]
- ASTM F2023 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water
- ASTM F2043 Standard Classification for Bicycle Usage
- ASTM F2063 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants[5]
- ASTM F2066 Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)[5]
- ASTM F2080 Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe
- ASTM F2146 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)[5]
- ASTM F2159 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
- ASTM F2181 Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants[5]
- ASTM F2229 Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)[5]
- ASTM F2248 Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass
- ASTM F2257 Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)[5]
- ASTM F2322 Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities
- ASTM F2348 Standard Performance Specification for Privacy Padlocks
- ASTM F2384 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)[5]
- ASTM F2412 Standard Test Methods for Foot Protection
- ASTM F2413 Standard Specification for Performance Requirements for Foot Protection
- ASTM F2527 Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)[5]
- ASTM F2581 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)[5]
- ASTM F2633 Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants[5]
- ASTM F2761 Essential safety requirements for equipment comprising the patient-centric integrated clinical environment (ICE) — Part 1: General requirements and conceptual model
- ASTM F2885 Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications[5]
- ASTM F2886 Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications[5]
- ASTM F2895 Standard Practice for Digital Radiography of Cast Metallic Implants[5]
- ASTM F2989 Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications[5]
- ASTM F3046 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320)[5]
- ASTM F3125 Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions. This is a combination of previous specifications A325, A325M, A490, A490M, F1852, and F2280.[7]
- ASTM F3159 Standard Safety Specification for Liquid Laundry Packets
- ASTM F3160 Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants[5]
- ASTM F3273 Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700)[5]
G[edit]
- G1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
- G2/G2M Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360°C) or in Steam at 750°F (400°C)
- G3 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
- G4 Standard Guide for Conducting Corrosion Tests in Field Applications
- G5 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
- G6 Standard Test Method for Abrasion Resistance of Pipeline Coatings
- G7/G7M Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
- G8 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
- G9 Standard Test Method for Water Penetration into Pipeline Coatings
- G10 Standard Test Method for Specific Bendability of Pipeline Coatings
- G11 Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings
- G12 Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel (Withdrawn 2013, replaced by D7091)
- G13/G13 Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test)
- G14 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
- G15 Standard Terminology Relating to Corrosion and Corrosion Testing (Withdrawn 2010, replaced by ASTM NACE / ASTMG193)
- G16 Standard Guide for Applying Statistics to Analysis of Corrosion Data
- G17 Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
- G18 Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
- G19 Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial (Withdrawn 2010, no replacement)
- G20 Standard Test Method for Chemical Resistance of Pipeline Coatings
- G21 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
- G24 Standard Practice for Conducting Exposures to Daylight Filtered Through Glass
- G28 Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
- G29 Standard Practice for Determining Algal Resistance of Plastic Films
- G30 Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
- G31 (ASTM/NACE) Standard Guide for Laboratory Immersion Corrosion Testing of Metals
- G32 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
- G33 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
- G34 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
- G35 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
- G36 Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
- G37 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys
- G38 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
- G39 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
- G40 Standard Terminology Relating to Wear and Erosion
- G41 Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
- G42 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
- G44 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution
- G46 Standard Guide for Examination and Evaluation of Pitting Corrosion
- G47 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
- G48 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
- G49 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
- G50 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
- G51 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
- G52 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
- G55 Standard Test Method for Evaluating Pipeline Coating Patch Materials
- G56 Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials
- G57 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
- G58 Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
- G59 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
- G60 Standard Practice for Conducting Cyclic Humidity Exposures
- G61 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
- G62 Standard Test Methods for Holiday Detection in Pipeline Coatings
- G63 Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
- G64 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
- G65 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
- G66 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
- G67 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
- G69 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
- G70 Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test) (Withdrawn 2013, no replacement)
- G71 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
- G72/G72M Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
- G73 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
- G74 Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
- G75 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
- G76 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
- G77 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
- G78 Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
- G80 Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings (Withdrawn 2013, no replacement)
- G81 Standard Test Method for Jaw Crusher Gouging Abrasion Test
- G82 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
- G84 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
- G85 Standard Practice for Modified Salt Spray (Fog) Testing
- G86 Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
- G87 Standard Practice for Conducting Moist SO2 Tests
- G88 Standard Guide for Designing Systems for Oxygen Service
- G90 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
- G91 Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation
- G92 Standard Practice for Characterization of Atmospheric Test Sites
- G93 Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
- G94 Standard Guide for Evaluating Metals for Oxygen Service
- G95 Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
- G96 Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
- G97 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
- G98 Standard Test Method for Galling Resistance of Materials
- G99 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
- G100 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
- G101 Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
- G102 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
- G103 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution
- G105 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
- G106 Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
- G107 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
- G108 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
- G109 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
- G110 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
- G111 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
- G112 Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
- G113 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
- G114 Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
- G115 Standard Guide for Measuring and Reporting Friction Coefficients
- G116 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
- G117 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests (Withdrawn 2016, no replacement)
- G118 Standard Guide for Recommended Format of Wear Test Data Suitable for Databases (Withdrawn 2016, no replacement)
- G119 Standard Guide for Determining Synergism Between Wear and Corrosion
- G120 Standard Practice for Determination of Soluble Residual Contamination in by Soxhlet Extraction
- G121 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
- G122 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
- G123 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
- G124 Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
- G125 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
- G126 Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
- G127 Standard Guide for the Selection of Cleaning Agents for Oxygen Systems
- G128/G128M Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems
- G129 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
- G130 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
- G131 Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
- G132 Standard Test Method for Pin Abrasion Testing
- G133 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
- G134 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
- G135 Standard Guide for Computerized Exchange of Corrosion Data for Metals
- G136 Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
- G137 Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
- G138 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
- G139 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
- G140 Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
- G141 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
- G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
- G143 Standard Test Method for Measurement of Web/Roller Friction Characteristics
- G144 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
- G145 Standard Guide for Studying Fire Incidents in Oxygen Systems
- G146 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
- G147 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
- G148 Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique
- G150 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
- G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- G152 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- G153 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- G154 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
- G155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
- G156 Standard Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test
- G157 Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries
- G158 Standard Guide for Three Methods of Assessing Buried Steel Tanks
- G160 Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials by Laboratory Soil Burial
- G161 Standard Guide for Corrosion-Related Failure Analysis
- G162 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
- G163 Standard Guide for Digital Data Acquisition in Wear and Friction Measurements (Withdrawn 2016, no replacement)
- G164 Standard Test Method for Determination of Surface Lubrication on Flexible Webs
- G165 Standard Practice for Determining Rail-to-Earth Resistance
- G166 Standard Guide for Statistical Analysis of Service Life Data
- G167 Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer
- G168 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
- G169 Standard Guide for Application of Basic Statistical Methods to Weathering Tests
- G170 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
- G171 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
- G172 Standard Guide for Statistical Analysis of Accelerated Service Life Data
- G173 Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface
- G174 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
- G175 Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications
- G176 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method
- G177 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
- G178 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
- G179 Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
- G180 Standard Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete
- G181 Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
- G182 Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings
- G183 Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
- G184 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
- G185 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
- G186 Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
- G187 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
- G188 Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
- G189 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
- G190 Standard Guide for Developing and Selecting Wear Tests
- G192 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
- G193 (ASTM/NACE) Standard Terminology and Acronyms Relating to Corrosion
- G194 Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
- G195 Standard Guide for Conducting Wear Tests Using a Rotary Platform, Double-Head Abraser
- G196 Standard Test Method for Galling Resistance of Material Couples
- G197 Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces
- G199 Standard Guide for Electrochemical Noise Measurement
- G200 Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
- G201 Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation
- G202 Standard Test Method for Using Atmospheric Pressure Rotating Cage
- G203 Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
- G204 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
- G205 Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
- G206 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
- G207 Standard Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers
- G208 Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
- G209 Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
- G210 Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus
- G211 Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
- G213 Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
- G214 Standard Test Method for Integration of Digital Spectral Data for Weathering and Durability Applications
- G215 Standard Guide for Electrode Potential Measurement
- G217 Standard Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method
Astm A36 Specification Pdf
See also[edit]
References[edit]
- ^'ASTM A255 - 10(2014) Standard Test Methods for Determining Hardenability of Steel'. ASTM. 2014. Retrieved August 29, 2017.
- ^C26 Committee. 'Guide for Application of Radiation Monitors to the Control and Physical Security of Special Nuclear Material'. doi:10.1520/c1112-99r05.(subscription required)
- ^'ASTM D1193 - 06(2018) Standard Specification for Reagent Water'. www.astm.org. Retrieved 25 February 2019.
- ^'ASTM International - Standards Search: E'. www.astm.org. Retrieved 25 February 2019.
- ^ abcdefghijklmnopqrstuvwxyzaaabacadaeafagahaiajakalamanaoapaqarasatauav'Subcommittee F04.12 on Metallurgical Materials'. ASTM International. Retrieved 7 May 2019.
- ^'ASTM F568M - 07 Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Withdrawn 2012)'. www.astm.org. Retrieved 25 February 2019.
- ^'Structural Bolting Specification Change', GlaserBolt, Retrieved March 11, 2016
Astm A36 Specification Pdf
External links[edit]
Astm A36 Specification Free Download For Pc
Standard Specification for
Carbon Structural Steel 1 This standard is issue issued d under the fixed designation designation A36/A36M; A36/A36M; the number immed immediately iately following following the designation designation indica indicates tes the year of original adoption or, in the case of revision, the year of last revis revision. ion. A number in parentheses parentheses indicates the year of last reapproval. reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the U.S. Department of Defense.
2. Referenc Referenced ed Documents
1. Sco Scope* pe* 1.1 This specification specification2 cover coverss carbo carbon n steel shapes, plates, and bars of str struct uctura urall qua quality lity for use in riv riveted eted,, bol bolted, ted, or welded construction of bridges and buildings, and for general structural purposes.
2.1 ASTM Standards: 3 A6/A6M Specificati A6/A6M Specification on for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling A27/A27M Spe Specifi cificati cation on for Stee Steell Cast Casting ings, s, Carb Carbon, on, for General Application A307 Sp Speci ecific ficati ation on fo forr Car Carbo bon n Ste Steel el Bo Bolts lts,, Stu Studs ds,, an and d Threaded Rod 60 000 PSI Tensile Strength A325 Specification A325 Specification for Structural Bolts, Steel, Heat Treated, 120/105 120/1 05 ksi Minimu Minimum m Tensile Strength A325M Spe Specific cificatio ation n for Str Struct uctura urall Bolt Bolts, s, Stee Steel, l, Hea Heatt Treated 830 MPa Minimum Tensile Strength (Metric) A500 Specification A500 Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes A501 Specifi Specification cation for Hot-F Hot-Formed ormed Welded Welded and Seamles Seamlesss Carbon Steel Struct Structural ural Tubing A502 Specification A502 Specification for Rivets, Steel, Structural A563 Specification A563 Specification for Carbon and Alloy Steel Nuts A563M Specificat A563M Specification ion for Carbon and Alloy Steel Nuts (Metric) A668/A668M Specification A668/A668M Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use A1011/A1011M Spe Specific cificatio ation n for Stee Steel, l, She Sheet et and Str Strip, ip, Hot-Ro Hot -Rolle lled, d, Car Carbon bon,, Str Struct uctura ural, l, Hig High-S h-Stre trengt ngth h Low Low-Alloy All oy,, Hig Highh-Str Stren ength gth Lo Loww-All Alloy oy wit with h Im Impr prov oved ed Formability, and Ultra-High Strength A1018/A1018M Spe Specifi cificati cation on for Ste Steel, el, She Sheet et and Str Strip, ip, Heav He avyy-Th Thic ickn knes esss Coil Co ils, s, HotHo t-Ro Roll lled ed,, Carb Ca rbon on,, Commercial, Commer cial, Drawi Drawing, ng, Struc Structural, tural, HighHigh-Streng Strength th LowAlloy All oy,, Hig Highh-Str Stren ength gth Lo Loww-All Alloy oy wit with h Im Impr prov oved ed Formability, and Ultra-High Strength F568M Specification F568M Specification for Carbon and Alloy Steel Externally
1.2 Supplementary requirements are provided for use where additional testing or additional restrictions are required by the purchaser. Such requirements apply only when specified in the purchase order. 1.3 Whe When n the steel is to be wel welded ded,, a weld welding ing procedu procedure re suitable for the grade of steel and intended use or service is to be uti utilize lized. d. See Appendi Appendix x X3 of Spe Specific cificatio ation n A6/A6M for information on weldability. 1.4 The values stated in either inch-poun inch-pound d units or SI units are to be regarded separately as standard. Within the text, the SI un units its ar aree sh show own n in br brac acke kets ts.. Th Thee va valu lues es st state ated d in eac each h system are not exact equivalents; therefore, each system is to be used independently of the other, without combining values in any way. 1.5 The text of this specification contains notes notes or footnotes, footnotes, or bot both, h, tha thatt pro provid videe exp explan lanato atory ry mate materia rial. l. Suc Such h not notes es and footnotes, footn otes, excluding excluding those in tables and figures, do not contain any mandatory requirements. 1.6 For str struct uctura urall pro produc ducts ts pro produc duced ed fro from m coi coill and fur fur-nished without heat treatment or with stress relieving only, the additional additio nal requi requirement rements, s, includ including ing additio additional nal testing requirements and the reporting of additional test results, of A6/A6M of A6/A6M apply. 1
This specification is under the jurisdiction of ASTM Committee A01 A01 on on Steel, Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee A01.02 on A01.02 on Structural Steel for Bridges, Buildings, Rolling Stock and Ships. Current edition approved Dec. 1, 2014. Published December 2014. Originally approved in 1960. Last previous edition approved in 2012 as A36/A36M – 12. DOI: 10.1520/A0036_A0036M-14. 2 For ASME Boiler and Pressure Vessel Code Applications, see related Specifications SA-36 in Section II of that Code.
3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at [email protected] For Annual Book of ASTM Standards volume information, refer to the standard’s Document Summary page on the ASTM website.
*A Summary of Changes section appears at the end of this standard Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
A36/A36M − 14 TABLE 1 Appurtenant Material Specifications
5. Bear Bearing ing Plates Plates 5.1 Unless otherwise otherwise specified, specified, plates used as bearing plates for bridges bridges sha shall ll be sub subject jected ed to mec mechan hanical ical tests and shall conform to the tensile requirements of Section 8.
NOTE 1—The specifier should be satisfied of the suitability of these materials for the intended application. Chemical composition or mechanical properties, or both, may be different than specified in A36/A36M. Material
ASTM Designation
Steel rivets Bolts High-strength bolts Steel nuts Cast steel Forgings (carbon steel) Hot-rolled Hot-ro lled sheets and strip
Cold-formed tubing Hot-formed tubing Anchor bolts
5.2 Unless otherwise otherwise specified, specified, mechanical mechanical tests shall not be 1 required for plates over 1 ⁄ 2 in. [40 mm] in thickness used as bearing plates in structures other than bridges, subject to the requirement that they shall contain 0.20 to 0.33 % carbon by heat analysis, that the chemical composition shall conform to the requirements of Table Table 3 in 3 in phosphorus and sulfur content, and that a sufficient discard shall be made to secure sound plates.
A502,, Grade 1 A502 A307, Grade A or F568M A307, or F568M,, Class 4.6 A325 or A325M A325 or A563 or A563M A563 or A27/A27M, Grade 65–35 [450–240] A27/A27M, A668/A668M, Class D A668/A668M, A1011/A1011M, SS Grade 36 [250] Type A1011/A1011M, 1 or Type 2 or A1018/A1018M or A1018/A1018M,, SS Grade 36 [250] A500, Grade B A500, A501 F1554, Grade 36 F1554,
6. Mate Material rialss and Manufacture Manufacture 6.1 The steel steel shall be killed 7. Chem Chemical ical Compositio Composition n
4
7.1 The hea heatt ana analys lysis is sha shall ll con confor form m to the req requir uireme ements nts prescribed in Table in Table 3, 3, except as specified in 5.2 5.2..
Threaded Metric Fasteners (Metr Threaded (Metric) ic) (Withdrawn (Withdrawn 2012) F1554 Spe Specifi cificati cation on for Anchor Anchor Bol Bolts, ts, Stee Steel, l, 36, 55, and 105-ksi Yield Strength
7.2 Th 7.2 Thee st steel eel sh shal alll co conf nfor orm m on pr prod oduc uctt an analy alysis sis to th thee requirement requi rementss prescr prescribed ibed in Table Table 3, subjec subjectt to the pro produc ductt analysis tolerances in Specification A6/A6M Specification A6/A6M..
3. Appurtenant Materials 3.1 When components components of a steel structure are identified identified with this ASTM designation designation but the product form is not listed in the scope of this specification, the material shall conform to one of the standards listed in Table in Table 1 unless 1 unless otherwise specified by the purchaser.
8. Tension Test Test 8.1 The material as represented represented by the test specimen, except except as specified in 5.2 in 5.2 and and 8.2 8.2,, shall conform to the requirements as to the tensile properties prescribed in Table in Table 2. 2. 8.2 Sha Shapes pes less less than 1 in.2 [645 mm2] in cross section and bars, other than flats, less than 1 ⁄ 2 in. [12.5 mm] in thickness or diam di amet eter er ne need ed no nott be su subj bjec ecte ted d to te tens nsio ion n te test stss by th thee manufacturer, provided that the chemical composition used is appropriate for obtaining the tensile properties in Table 2. 2.
4. General Requirements Requirements for Delivery Delivery 4.1 Structural products furnished under this specifi specification cation shall con shall confor form m to the req requir uireme ements nts of the cur curren rentt edi edition tion of Specification A6/A6M, A6/A6M, for for the spe specific cific str structu uctural ral pro produc ductt ordered, unless a conflict exists in which case this specification shall preva prevail. il.
9. Keyw Keywords ords 9.1 bars; bolted construction; construction; bridges; build buildings; ings; carbon; plates; riv plates; riveted eted con constru structio ction; n; sha shapes pes;; ste steel; el; str structu uctural ral stee steel; l; welded construction
4.2 Coils are excluded from qualification qualification to this specification until they are processed into a finished structural product. Structural Structu ral prod products ucts produced from coil means struc structural tural products that have been cut to individual lengths from a coil. The processor directly controls, or is responsible for, the operations involved in the processing of a coil into a finished structural produc pro duct. t. Suc Such h ope operat ration ionss incl include ude dec decoili oiling, ng, lev levelin eling g or straigh stra ighten tening ing,, hot hot-fo -formi rming ng or col cold-f d-form orming ing (if app applica licable ble), ), cutting to length, testing, inspection, conditioning, heat treatment (if applicable), packaging, marking, loading for shipment, and certifica certification. tion.
TABLE 2 Tensile RequirementsA Plates, Shapes,B and Bars: Tensile strength, ksi [MPa] Yield point, min, ksi [MPa] Plates and Bars:D ,E Elon El onga gati tion on in 8 in in.. [2 [200 00 mm mm], ], mi min, n, % Elon El onga gati tion on in 2 in in.. [5 [50 0 mm mm], ], mi min, n, % Shapes: Elon El onga gati tion on in 8 in in.. [2 [200 00 mm mm], ], mi min, n, % Elon El onga gati tion on in 2 in in.. [5 [50 0 mm mm], ], mi min, n, % A
58 – 80 [ 40 0 –5 5 0] 36 [250]C 20 23 20 21B
See the Orient Orientation ation subsection subsection in the Tension Tension Tests Tests sectio section n of Specifi Specification cation A6/A6M. A6/A6M. B For wide flange shapes with flange thickness over 3 in. [75 mm], the 80 ksi [550 MPa] maximum tensile strength does not apply and a minimum elongation in 2 in. [50 mm] of 19 % applies. C Yield point 32 ksi [220 MPa] for plates over 8 in. [200 mm] in thickness. D Elongation not required to be determined for floor plate. E For plates wider than 24 in. [600 mm], the elongation requirement is reduced two percentage percen tage points points.. See the Elonga Elongation tion Requir Requirement ement Adjustments Adjustments subsec subsection tion under the Tension Tests section of Specification A6/A6M Specification A6/A6M..
NOTE 1—For 1—For struc structural tural products produced from coil and furnished without heat treatment or with stress relieving only, two test results are to be reported for each qualifying coil. Additional requirements regarding structural struct ural products produced from coil are descr described ibed in Specifi Specification cation A6/A6M.. A6/A6M
4
The last app approve roved d vers version ion of this historica historicall sta standa ndard rd is refe referenc renced ed on www.astm.org.
2
A36/A36M − 14 TABLE 3 Chemical Requirements
NOTE 1—Where “. . .” appears in this table, there is no requirement. The heat analysis for manganese shall be determined and reported as described in the heat analysis section of Specification A6/A6M Specification A6/A6M.. ShapesA
Product
Thickness, in. [mm]
Carbon, max, % M a ng an e s e, % Phosphorus, max, % Sulfur, max, % S i l i c o n, % Copper, min, % when cop per steel steel is speci specified fied
Plates > 15-in. [380 mm] WidthB
Al l
To 3 ⁄ 4 [20], incl
Over 3 ⁄ 4 to 11 ⁄ 2 [20 to 40], incl
Over 11 ⁄ 2 to 21 ⁄ 2 [40 to 65], incl
Over 21 ⁄ 2 to 4 [65 to 100], incl
0 .2 6 . .. 0 .0 4 0 .0 5 0 .4 0 m a x 0. 20
0 .2 5 .. . 0 .0 3 0 0. 03 0 0. 40 m a x 0. 20
0 .2 5 0 .8 0 – 1 . 2 0 0 .0 3 0 0 .0 3 0 0. 0 .4 0 m a x 0. 20
0 .2 6 0.80–1.20 0. 0. 03 0 0 .0 3 0 0. 15 – 0. 40 0 .2 0
0 .2 7 0.85–1.20 0. 0. 03 0 0. 03 0 0 .1 5 – 0 .4 0 0. 20
Bars; Plates
#
15-in. [380 mm] WidthB
Over 4 [100]
To 3 ⁄ 4 [20], incl
Over 3 ⁄ 4 to 11 ⁄ 2 [20 to 40], incl
Over 11 ⁄ 2 to 4 [100], incl
Over 4 [100]
0. 29 0.85–1.20 0. 0 .0 3 0 0 .0 3 0 0 .1 5 – 0 .4 0 0 .2 0
0. 26 ... 0 .0 4 0 .0 5 0. 40 m a x 0. 20
0 .2 7 0 . 6 0 – 0 .9 0 0 .0 4 0 .0 5 0 .4 0 m a x 0. 20
0 .2 8 0 .6 0 – 0 .9 0 0. 0 .0 4 0 .0 5 0 .4 0 m a x 0 .2 0
0 .2 9 0.60–0.90 0. 0 .0 4 0 .0 5 0 .4 0 m a x 0 .2 0
A
Manganese content of 0.85–1.35 % and silicon content of 0.15–0.40 % is required for shapes with flange thickness over 3 in. [75 mm]. For each reduction of 0.01 percentage point below the specified carbon maximum, an increase of 0.06 percentage point manganese above the specified maximum will be permitted, up to the maximum of 1.35 %. B
SUPPLEMENTARY REQUIREMENTS These requirements shall not apply unless specified in the order. Standar Stan dardiz dized ed sup supple plemen mentar tary y req requir uireme ements nts for use at the opt option ion of the pur purcha chaser ser are list listed ed in Specification A6/A6M.. Those that are considered suitable for use with this specification are listed by Specification A6/A6M title: S5. Charpy V-Notch V-Notch Impact Test. Test. S30. Char Charpy py V-Not -Notch ch Impac Impactt Test for Structural Structural Shape Shapes: s: Alternate Core Location S32. Singl Singlee Heat Bundles S32.1 S32 .1 Bun Bundles dles containi containing ng sha shapes pes or bar barss sha shall ll be fro from m a single heat of steel.
SUMMARY OF CHANGES Committ Comm ittee ee A0 A01 1 ha hass id iden entifi tified ed th thee lo loca catio tion n of se selec lected ted ch chan ange gess to th this is st stan anda dard rd sin since ce th thee la last st iss issue ue (A36/A36M – 12) that may impact the use of this standard. (Approved Dec. 1, 2014.) (1) Revised Table 3 to modify phosphorus and sulfur limits for plate products greater than 15 in. [380 mm] in width. ASTM International International takes no positi position on respecting the validi validity ty of any patent rights assert asserted ed in connec connection tion with any item mentio mentioned ned in this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, are entirely their own responsibility. This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years and if not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standards and should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of the responsible respon sible technical technical committee, which you may attend. If you feel that your comments have not receiv received ed a fair hearing you should make your views known to the ASTM Committee on Standards, at the address shown below. This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the above address addr ess or at 610610-832832-9585 9585 (pho (phone), ne), 610610-832832-9555 9555 (fax (fax), ), or serv [email protected][email protected] astm.org .org (e-m (e-mail) ail);; or thro through ugh the ASTM webs website ite (www.astm. (www .astm.org). org). Permission Permission rights to photocopy the standa standard rd may also be secure secured d from the Copyri Copyright ght Clearance Center, Center, 222 Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http://www.copyright.com/
3